PLASTICS TOUCHPOINT GROUP

INFORMATION FOR THE FLEXIBLE PACKAGING & FILM CONVERTING INDUSTRY

Linkedin

Navigation Menu

Troubleshooting Publications

Online Training

Processing Machinery

Material Handling

Calibration & Certification

Oakland's Gauge Measurement Selection Guide

MX-1100e Digital Touch Screen MicroGauge

Oakland Spot Gauge Measurement Instruments

Suitable for measuring from 1 micron (0.1 mil) up to 7.5 mm (300 mil).
Operator positions sample underneath foot and reads reported gauge/caliper.
 
MX-1225 MicroGauge Profiler

Oakland Mechanical Gauge Profilers

Suitable for measuring from 1 micron (0.1 mil) up to 7.5 mm (300 mil).
Measurement spacing: 0.5 to 10 cm (0.2 to 4 inches) in 6 increments for film, 2.5 to 15 cm (1 to 6 inches) in 6 increments fo paper. Custom ranges available on request.
CX-1025 Capacitance Gauge Profiler with AutoCal and Parallelism Adjustable Anvil

Oakland Capacitance Gauge Profilers

Capacitance sensor capable of high resolution measurement of non-metallic film or sheet from 1 micron (0.1 mil) up to 450 microns (18 mils).
AutoCalTM Contact probe automatically calibrates capacitance sensor.
AutoCalTM Contact probe capable of measuring metallic or non-metallic film or sheet from 1 micron (0.1 mil) up to 450 microns (18 mils).

Conforms To:

ASTM D374/374M

Thickness of Solid Electrical Insulation

ASTM D1777

Thickness of Textile Materials

ASTM D1836

Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge

ASTM D6988

Determination of Thickness of Plastic Film Test Specimens

ASTM F2251

Thickness Measurement of Flexible Packaging Materials

BS 2782-9K Method 630A

Determination of Thickness by Mechanical Scanning of Flexible Sheet

DIN 53370

Testing of Plastics - Determination of Thickness by Mechanical Scanning

ISO 534

Paper and Board - Determination of Thickness, Density and Specific Volume

ISO 3034

Corrugated Fibreboard - Determination of Single Sheet Thickness

ISO 4593

Plastics - Film and Sheeting - Determination of Thickness by Mechanical Scanning

TAPPI T411

Thickness (caliper) of paper, paperboard, and combined board

Scroll to Top

PSI-Polymer Systems Inc. Information Request

For locations outside of Canada, contact PSI-Polymer Systems Inc.

REQUEST QUOTATION FOR MX-1100e MicroGauge Profiler

REQUEST QUOTATION FOR DAVINOR LAYERGAUGE PROFILER

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

REQUEST INFORMATION FOR AUXILIARY EQUIPMENT

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

REQUEST INFORMATION FOR AUTOMATIC SCRAP RECYCLING SYSTEM

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

REQUEST INFORMATION MATERIAL HANDLING SYSTEM

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

REQUEST INFORMATION ABOUT RAILCAR UNLOADING SYSTEM

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

REQUEST INFORMATION ABOUT CONTINUOUS GRAVIMETRIC BLENDERS

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

REQUEST INFORMATION ABOUT BATCH GRAVIMETRIC BLENDERS

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

REQUEST INFORMATION ABOUT Gravitrol® EXTRUSION STABILITY CONTROL

REQUEST QUOTATION FOR SR-1540 DIGITAL UNIVERSAL TESTER

Client List

Canada

  • Albéa Canada Inc. (Brampton – Ontario)
  • Alpha Marathon Film Extrusion Technologies Inc. (Woodbridge – Ontario)
  • AL-Pack Enterprises (Moncton – New Brunswick)
  • Alte-Rego Corporation (Toronto – Ontario)
  • AT Plastics Inc. – Celanese EVA Polymers (Edmonton – Alberta)
  • Atlantic Packaging Products Ltd. (Toronto – Ontario)
  • Balcan Plastics Ltée (St-Léonard – Québec)
  • Berry Plastics Corporation (Belleville, North Bay, Orillia – Ontario)
  • Bonar Inc. (Burlington – Ontario, Calgary – Alberta)
  • BramCal Production Inc. (Barrie – Ontario)
  • BMP Extrusion (Shelburne – Ontario)
  • Canadian Plastics Industry Association (Toronto – Ontario)
  • Canadian Plastics Magazine (Toronto – Ontario)
  • Canadian Plastics Training Centre (Toronto – Ontario)
  • Cantar Polyair Corporation (Toronto – Ontario)
  • Chantler Packaging Inc. (Mississauga – Ontario)
  • Cascades Flexible Packaging ULC – (Mississauga – Ontario, Kingsley Falls – Québec)
  • Clorox Canada – Glad Division (Orangeville – Ontario)
  • Covalence Plastics (Belleville – Ontario)
  • Crawling Valley Plastics Ltd. (Bossano – Alberta)
  • Davis Standard Corporation – Brampton Engineering Division (Brampton – Ontario)
  • Duchesne et Fils Ltée (Yamachiche – Québec)
  • E.B. Packaging Ltd. (East Broughton – Québec)
  • Emballage St.-Jean Ltée (St-Jean-sur-Richelieu – Québec)
  • Hofmann Plastics Inc. (Orangeville – Ontario)
  • Environment Canada (Ottawa – Ontario)
  • Exopack Ltd. (Newmarket – Ontario)
  • Farnell Packaging Ltd. (Dartmouth – Nova Scotia)
  • Gelpac Inc. – Poly-Plus Inc. (Farnham – Québec)
  • Gould’s Packaging Industries Ltd. (Montréal – Québec)
  • Granta Manufacturing (Bossano – Alberta)
  • Hood Packaging Corporation – Glopak (St-Léonard – Québec)
  • Hymopack Ltd. (Toronto – Ontario)
  • Imaflex Inc. (Montréal – Québec)
  • Inteplast Bags and Films Corporation – Haremar Division (Concord – Ontario)
  • Inteplast Bags and Films Corporation – W. Ralston Division (Brampton – Ontario)
  • International Commercial Packaging Limited (Toronto – Ontario)
  • Labelad Ltd. (Markham – Ontario)
  • Licaplast Industries Emballages Inc. – M’Plast Inc. (Lachine – Québec)
  • Macro Engineering & Technology Inc. (Mississauga Ontario)
  • Malpack Polybag Ltd. (Ajax – Ontario)
  • Mercury Plastics, Inc. – Western Concord Division (Edmonton – Alberta)
  • Mobil Chemical Canada Inc. (Belleville – Ontario)
  • Northern Alberta Institute of Technology (Edmonton – Alberta)
  • Nova Chemicals Corporation (Calgary – Alberta)
  • Novolex™ Custom Film & Bag (Orangeville – Ontario)
  • Ogilvy Renault LLC (Montréal – Québec)
  • Olympic Plastic Bag Ltd. (Toronto – Ontario)
  • Omniplast Inc. (St-Hubert – Québec)
  • Packaging Association of Canada (Toronto – Ontario)
  • Packall Packaging Inc. (Mississauga – Ontario)
  • Performance Packaging Inc. (Cowansville – Québec)
  • Pétromont Inc. (Montréal Est – Québec)
  • Poly Cello (Amhurst – Nova Scotia)
  • Poly Expert Inc. (Laval – Québec)
  • Poly Five Inc. (Downsview – Ontario)
  • Poly Plastic Limited (Mississauga – Ontario)
  • Polyethics Industries Inc. (Orillia – Ontario)
  • Polykar Industries Inc. (Ville St-Laurent – Québec)
  • Polytarp Products (Downsview – Ontario)
  • Polyten Inc. (Richmond Hill – Ontario)
  • Poly-Tech Radiant Inc. (Beauport – Québec)
  • Quandra Chemicals (Burlington – Ontario)
  • Ryerson International (Toronto – Ontario)
  • Seiu Lake Plastics Ltd. (Hussar – Alberta)
  • Solmax Géosynthétiques Inc. (Varennes – Québec)
  • Superior Extrusions Ltd. (Concord – Ontario)
  • Symmax Tech. Inc. (Richmond Hill – Ontario)
  • Transco Plastic Industries (Montréal – Québec)
  • Tempo Plastics Ltd. (Innisfil – Ontario)
  • Transcontinental Packaging Inc. (Whitby – Ontario)
  • Tychopoly Inc. (Woodbridge – Ontario)
  • University of Toronto (Toronto – Ontario)
  • Winrock Plastics Ltd. (Raymond – Alberta)
  • Wittmann Canada Inc. (Richmond Hill – Ontario)
  • Zohar Group (Montréal Est, St-Henri – Québec)

USA

  • 3M Company (Menomonie – WI)
  • All American Poly (Lawrenceville – GA)
  • Alliance Rubber Company (Hot Springs – AR)
  • Berry Plastics Corporation – Rollpack Division (Goshen – IN)
  • Celgard Inc. (Charlotte – NC)
  • ChemiCorp, Inc. (Coral Gables – FL)
  • Chevron Phillips Chemical Company LLP (The Woodlands – TX)
  • Coburn Graphic Films, Inc. (Lakewood – NJ)
  • Cortec Advanced Films Corporation (Cambridge – MN)
  • Deerfield Urethane – Bayer AG (South Deerfield – MA)
  • Edison Technical Services (Bethesda – MD)
  • Entek International Ltd. (Lebanon – OR)
  • Film Tech, LLC (Stanley – WI)
  • Formosa Plastics Corporation (Point Comfort – TX)
  • Fres-co System USA, Inc. (Telford – PA)
  • Handgards, Inc. (El Paso – TX)
  • Hood Packaging Corporation (Tyler – TX)
  • Ingenia Polymers Corporation (Houston – TX)
  • Inteplast Bags & Film Corporation – MTI LLC & Polyexe Corp. (Brentwood – NH)
  • Kimberly-Clark Corporation (Atlanta – GA)
  • Kohner, Mann & Kailas, S.C. (Milwaukee – WI)
  • Lone Star Plastics Inc. (Prattville – AL)
  • Loparex LLC (Hammond – WI)
  • Louisiana Plastic Industries (West Monroe – LA)
  • McNeel International Corp. (Tampa – FL)
  • Mercury Plastics, Inc. – Polypak Packaging Division (Los Angeles – CA)
  • Mid South Extrusion, Inc. (Monroe – LA)
  • Mid-West Poly Pak, Inc. (Doylestown – OH)
  • Milliken & Company (Spartanburg – SC)
  • Mondelez International – Kraft Foods (Glenview – IL)
  • Petoskey Plastics, Inc. (Petoskey – MI)
  • Plascon Films, Inc. (Traverse City – MI)
  • Pol-Tex International (Mont Belvieu – TX)
  • Poly-America, L.P. (Grand Prairie – TX)
  • Profile Industrial Packaging, Inc. (grand Rapids – MI)
  • Raven Industries, Inc. (Sioux Falls – SD)
  • Roplast Industries Inc. (Oroville – CA)
  • ORC International (Bloomington – MN)
  • Plascon Group (Traverse City – MI)
  • Saint-Gobain Corporation (Wayne – NJ)
  • Sealed Air Corporation – Cryovac Division (Duncan, Simpsonville – SC)
  • Scholle Corporation (Chicago – IL)
  • SMK Packaging, Inc. (San Leandro – CA)
  • Society of Plastics Engineers (Atlanta – GA, Charleston – SC, Chicago – IL, Irvine – CA, Milwaukee – WI, New York – NY, Orlando – FL, Caguas – Puerto Rico)
  • Society of Manufacturing Engineers (Cincinnati – OH)
  • Sonnenschein Nath & Rosenthal LLP (Kansas City – MO)
  • Total Information Inc. (Rochester – NY)
  • Transcontinental Packaging Inc. – Marshall Plastic Film (Martin – MI)
  • University of Wisconsin (Madison – WI)
  • Viskase Corporation (Kentland – IN)
  • Westlake Chemical Corporation (Longview – TX)
  • Werthan Packaging (Nashville – TN)

South America

  • Braskem S.A. (São Paulo – Brazil)
  • CORPLASA, Corporación del Plástico S.A. de C.V. (Tegucigalpa – Honduras)
  • Grupo Olefinas SLP (San Luis Potosi – Mexico, Villa Noeva – Guatemala)
  • Grupo Polytec (Villa Noeva – Guatemala)
  • Rotoplastics Trinidad Ltd. (San Juan – Trinidad)
  • Servico Nacional de Aprendizagem Industrial SENAI (Salvador – Brazil)
  • Tubyplast S.a.s. (Medellin – Columbia)

Europe

  • Albéa Group (Gennevilliers – France)
  • Applied Market Information LLC (Bristol – United Kingdom)
  • Kraft Foods Inc. (Reading – United Kingdom)
  • Normer AS (Slathelle – Norway)
  • Optical Control Systems GmbH (Witten – Germany)
  • RENOLIT Nederland B.V. (Amsterdam – The Netherlands)
  • RKW Sweden AB (Helsingborg – Sweden)
  • Sanders Polyfilms Ltd. (Hereford – United Kingdom)

Middle East / Africa

  • Al-Jeathen Industrial & Trading Group (Al-Kharj – Saudi Arabia)
  • Bischof + Klein Middle East Co. (Dammam – Saudi Arabia)
  • Dammam Dome Plastic Factory Co. Ltd. (Dammam – Saudi Arabia)
  • Gulf Packaging Systems Ltd. (Jeddah – Saudi Arabia)
  • Hyma Plastic (Mansouria / Giza – Egypt)
  • Masterpak SAL (Zouk Mosbeh / Beirut – Lebanon)
  • National Industrialization Company TANSEE (Al-Jubail – Saudi Arabia)
  • Napco Modern Plastic Products Co. (Al Khobar, Dammam – Saudi Arabia)
  • Napco Packaging Systems Co. Ltd. (Jeddah – Saudi Arabia)
  • Netafim (Kibbutz Hatzerim – Israel)
  • Packaging Solutions Factory Co. Ltd. (Jeddah – Saudi Arabia)
  • Plasto-Sac Group (Sderot – Israel)
  • Plastnir (Kibbutz Nir Eliyahu – Israel)
  • Polythene & Plastic Products Co LLC (Wadi Kabeer – Sultanate of Oman)
  • Prime Plastic Products (3P) (Jeddah – Saudi Arabia)
  • Rowad International Geosynthetics Co. Ltd. (Dammam – Saudi Arabia)
  • Saudi Arabia Basic Industries Corporation – SABIC (Dammam, Jeddah, Riyadh – Saudi Arabia, Dubai – United Arab Emirates, Cairo – Egypt, Hammamet – Tunisia, Casablanca – Morocco)
  • Society of Israel Plastics & Rubber Manufacturers (Tel Aviv – Israel)
  • Tosaf Compounds Ltd. (Afula – Israel)

Asia / Pacific

  • Aperio Group (NZ) Limited (Christchurch – New Zealand)
  • Evermax Plastics Industry Co., Ltd. (JiaShan Town – China)
  • Hong Kong Productivity Council (Hong Kong – China)
  • Kenner Material & System Co., Ltd. (Jhongi City – Taiwan)
  • Korea Prepac (DanWon-gu – South Korea)
  • Labtech Engineering Co., Ltd. (Prakasa – Thailand)
  • Ningbo Huafeng Packaging (Zheijiang – China)
  • NHH Co. Ltd. (Fo Tan – Hong Kong)
  • PAC Worldwide (Shah Alam – Malaysia)
  • Plaspak Ltd. (Palma – Mouritius)
  • Plastics New Zealand Incorporated (Aukland – New Zealand)
  • Royal Melbourne Institute of Technology (Melbourne – Australia)
  • Society of Plastics Engineers (Melbourne – Australia)
  • Sun Centre Machinery Co. Ltd. (Shanghai – China)
  • TechnoBiz Group (Jakarta – Indonesia, Kuala Lumpur – Malaysia, Bangkok – Thailand)
  • Universal Plastic & Metal Manufacturing Limited (Dongguan – China)

REQUEST QUOTATION FOR DENSIMETER

REQUEST QUOTATION FOR DART IMPACT TEST SOFTWARE

REQUEST TROUBLESHOOTING SERVICE ASSISTANCE

REQUEST QUOTATION FOR PROJECT MANAGEMENT SERVICES

REQUEST QUOTATION FOR PRODUCT DESIGN SERVICES

REQUEST QUOTATION FOR MATERIALS MANAGEMENT SERVICES

REQUEST QUOTATION FOR LEGAL EXPERT SERVICES

REQUEST QUOTATION LABORATORY TESTING SERVICE

REQUEST QUOTATION FOR ST-1210 SURFACE SMOOTHNESS TESTER

REQUEST QUOTATION FOR RT-6000 Opacity Meter

REQUEST QUOTATION FOR MX-1225 MicroGauge Profiler

REQUEST QUOTATION FOR MX-1210 MicroGauge Profiler

REQUEST QUOTATION FOR MX-1200 MicroGauge

REQUEST QUOTATION FOR MX-1100 MicroGauge

REQUEST QUOTATION FOR MT-2500 SERIES TENSILE TESTER

REQUEST QUOTATION FOR MT-1500 SERIES UNIVERSAL TEST STAND

REQUEST QUOTATION FOR STATIC AND KINETIC COF SOFTWARE

REQUEST QUOTATION FOR FX-7300 STATIC AND KINETIC COF TESTER

REQUEST QUOTATION FOR FX-7000 SA STATIC COF TESTER

REQUEST QUOTATION FOR ELMENDORF TEAR TESTER

REQUEST QUOTATION FOR LEVER PRESS SAMPLE CUTTER

REQUEST QUOTATION FOR STRIP SAMPLE CUTTER

REQUEST QUOTATION FOR FREE FILM SHRINKAGE TESTER

REQUEST QUOTATION FOR DART IMPACT TESTER

REQUEST QUOTATION FOR CX-1025 CAPACITANCE GAUGE PROFILER

REQUEST QUOTATION FOR CX-1020 CAPACITANCE GAUGE PROFILER

REQUEST QUOTATION FOR CX-1000 CAPACITANCE GAUGE PROFILER

REQUEST QUOTATION FOR STATIC AND KINETIC COF, PEEL/SEAL STRENGTH TESTER

REQUEST QUOTATION FOR STATIC AND KINETIC COF TESTER

REQUEST QUOTATION FOR FX-7100 FW STATIC AND KINETIC COF TESTER

REQUEST QUOTATION FOR BLOCKING FORCE TESTER

REQUEST QUOTATION FOR HEAT SEALER

REQUEST QUOTATION FOR DIGITAL CALPIER

REQUEST QUOTATION FOR MELT FLOW INDEXER

Thank you for contacting Plastics Touchpoint Group, Inc.

We will respond to your inquiry as soon as possible.

You can also reach us via e-mail at: info@plasticstouchpoint.com

PCC Equipment Inquiry

Plastics Touchpoint Group, Inc. is Canadian sales contact.

For USA sales contacts, go to the USA locator.

For all other regions, go to the contact information page.

DOWNLOAD PREVIEW

RECEIVE QUOTE

$350.00

Cdn + Applicable taxes

Includes delivery by mail to Canada and Continental USA

Multiple Book Discounts

Multiple book discounts are available. Complete the attached quote request form for details.

Currency Options

US and Canadian fund currencies are available.

Payment Terms

Payment in advance using PayPal

Shipping

Shipping costs outside of Canada or USA will be included in the quotation.

REQUEST QUOTATION FOR FACTORY AUDIT AND BENCHMARKING SERVICE

REQUEST QUOTATION FOR CUSTOMIZED TRAINING SERVICES

REQUEST QUOTATION FOR CALIBRATION / CERTIFICATION / REPAIR SERVICES

DOWNLOAD PREVIEW

RECEIVE QUOTE

$300.00

Cdn + Applicable taxes

Includes delivery by mail to Canada and Continental USA

Multiple Book Discounts

Multiple book discounts are available. Complete the attached quote request form for details.

Currency Options

US and Canadian fund currencies are available.

Payment Terms

Payment in advance using PayPal

Shipping

Shipping costs outside of Canada or USA will be included in the quotation.