Oakland's Spot Gauge Measurement Selection Guide
Oakland MX-1100e Digital Touch Screen MicroGauge
Suitable for measuring from 1 micron (0.1 mil) up to 7.5 mm (300 mil).
Cycle rate: 20 to 40 per minute for film, 12 to 20 per minute for paper.
Touch screen controls display both linear and polar gauge variation graphs.
On-board firmware reports High, Low, Average, Standard Deviation (1 sigma) and Data Count.
RS-232 port for computer collection of thickness data for statistical analysis, graphics and archiving results..
Oakland MX-1200 MicroGauge
Suitable for measuring from 1 micron (0.1 mil) up to 7.5 mm (300 mil).
Cycle rate: 20 to 40 per minute for film, 12 to 20 per minute for paper.
On-board firmware reports High, Low, Average, Standard Deviation (1 sigma) and Data Count.
RS-232 port for computer collection of thickness data for statistical analysis, graphics and archiving results..
Oakland MX-1100 MicroGauge
Suitable for measuring from 1 micron (0.1 mil) up to 7.5 mm (300 mil).
Cycle rate: 20 to 40 per minute for film, 12 to 20 per minute for paper.
Reports last measured value on display.
RS-232 port for computer collection of thickness data for statistical analysis, graphics and archiving results.
Mitutoyo 543-552 DigimaticTM ABSOLUTE Indicator
Suitable for measuring from 1 micron (0.1 mil) up to 12.7 mm (500 mil).
Reports last measured value on display.
External power supplied back-lit screen changes from green to red when measurement is outside user specified tolerance.
DigimaticTM data export capability.
Upgradeable to Parallelism Adjustable Anvil for more consistent results.
Mitutoyo 543-392 Digital Indicator wth Adjustable Anvil
Suitable for measuring from 1 micron (0.1 mil) up to 12.7 mm (500 mil).
Reports last measured value on display.
Battery powered for portability.
DigimaticTM data export capability.
Upgraded Parellelism Adjustable Anvil for more consistent results.
Mitutoyo 543-392 Digital Indicator wth 7007-10 Stand
Suitable for measuring from 1 micron (0.1 mil) up to 12.7 mm (500 mil).
Reports last measured value on display.
Battery powered for portability.
DigimaticTM data export capability.
Mitutoyo 543-392 Dead-Weight Digital Indicator wth Adjustable Anvil
Suitable for measuring stiffer film, sheet and paper from 1 micron (0.1 mil) up to 12.7 mm (500 mil).
Reports last measured value on display.
Battery powered for portability.
DigimaticTM data export capability.
Upgraded Parellelism Adjustable Anvil for more consistent results.
Conforms To:
ASTM D374/374M
Thickness of Solid Electrical Insulation
ASTM D1777
Thickness of Textile Materials
ASTM D6988
Determination of Thickness of Plastic Film Test Specimens
ASTM F2251
Thickness Measurement of Flexible Packaging Materials
BS 2782-9K Method 630A
Determination of Thickness by Mechanical Scanning of Flexible Sheet
DIN 53370
Testing of Plastics - Determination of Thickness by Mechanical Scanning
ISO 534
Paper and Board - Determination of Thickness, Density and Specific Volume
ISO 3034
Corrugated Fibreboard - Determination of Single Sheet Thickness
ISO 4593
Plastics - Film and Sheeting - Determination of Thickness by Mechanical Scanning
TAPPI T411
Thickness (caliper) of paper, paperboard, and combined board
