Oakland MT-2500 Series Tensile Testers
Oakland’s MT-2500 series of tensile testers feature can be configured for very low force, high resolution force tests or forces up to 450 Kgf/4.5 kN/1000 lbf. Test speed range is 2.5 to 500 mm/min (0.1 to 20 in/min). Maximum test travel distance is up to 970 mm (38.2 in), depending on the model selected. A large assortment of fixtures, grips and accessories can be attached to these front facing instruments. These features allow faster test speeds and larger maximum loads instead of switching to more expensive dual-screw devices.
Computer controlled, driven by Oakland’s Model MT-2500 Quality Control Software, meeting standard testing requirements for laboratory or plant floor environments. The versatile design allows for attachment of a variety of fixtures, grips and accessories.
Refer to the MT-2500 Series Software for built in test capabilities. Refer to the Configuration Guides to select the optimum configuration and fixtures or grips for your testing requirements.
Oakland MT-2500 Series Software
Oakland’s MT-2500 Series software includes test procedures for Tensile to Break, 1% Secant Modulus, Elastic Modulus, Flexural Modulus, Coefficient of Friction, Force Testing, Peel/Seal Strength, Shrink Force, Force at 100% Elongation, Energy Absorption, Cling Peel Strength, Three Point Bend and Block Re-block Strength. Suitable fixtures are available for each test. Setup conditions can be adjusted to conform with a variety of standard test methods. Compatible with MT-1500 and MT-2500 series testers. Requires computer with MS WindowsTM to operate.
Oakland MT-2500 Series Tensile Tester Configuration Guide
Select your preferred crosshead travel distance and mounting configuration using the Universal Test Stand Configuration Guide.
Select your preferred load cell capacity from the Universal Test Stand Configuration Guide.
Oakland MT- Series Fixtures and Accessories Configuration Guide
Select your preferred fixture based on the test method required.
The configuration guide indicates which fixtures are compatible with your preferred instrument.
Oakland MT- Series Grips Configuration Guide
Select your preferred grips based on the test method required.
The configuration guide includes details concerning dimensions, applications and grip force specifications
Load Cell Calibration Weights
Oakland’s load cells need only 15% of maximum range to calibrate. Contact Plastics Touchpoint Group to order certified weights for your instrument.
