Oakland SR-1500 Series UniversalPlusTM Advanced Force Tester
The SR-1500 series of UniversalPlusTM Advanced Force testers can be operated as stand-alone (console controlled) to measure force vs. elongation, tensile and bond strength. The frame can accommodate forces up to 220 Kgf/2.2 kN/500 lbf load with a maximum travel distance of 1015 mm (40 inches). The Standard speed range is 2.5 to 500 mm/min (0.1 to 20 in/min). High speed options include 10 to 1015 mm/min (0.4 to 40 in/min) and 25 to 2030 mm/min (1 to 80 in/min), depending on the model selected.. The oversized work-surface allows attachment of a large variety of fixtures, grips and accessories. Many test fixtures can easily be installed on these robust devices. These features allow faster test speeds and larger maximum loads instead of switching to more expensive dual-screw devices.
Add optional MT-2500 Series Software for more built in test capabilities such as COF, secant modulus, elastic recovery (stretch hood), block / re-block and cling peel strength. Refer to the Configuration Guides to select the optimum configuration and fixtures or grips for your testing requirements.
Oakland MX-1100e Touch Screen MicroGauge
Add Oakland’s MX-1100e Touch Screen MicroGauge for sample thickness data integration directly to SR Series Force Testers for automatic calculation of thickness normalized strength values.
Oakland MT-1500 Series Universal Test Stand Configuration Guide
Select your preferred crosshead travel distance and mounting configuration using the Universal Test Stand Configuration Guide.
Select your preferred load cell capacity from the Universal Test Stand Configuration Guide.
Oakland MT- Series Fixtures and Accessories Configuration Guide
Select your preferred fixture based on the test method required.
The configuration guide indicates which fixtures are compatible with your preferred instrument.
Oakland MT- Series Grips Configuration Guide
Select your preferred grips based on the test method required.
The configuration guide includes details concerning dimensions, applications and grip force specifications
Load Cell Calibration Weights
Oakland’s load cells need only 15% of maximum range to calibrate. Contact Plastics Touchpoint Group to order certified weights for your instrument.
Oakland MT-2500 Series Quality Control Software
Add Oakland’s MT-2500 Series software to increase test capability to include test procedures for Tensile to Break, 1% Secant Modulus, Elastic Modulus, Flexural Modulus, Coefficient of Friction, Force Testing, Peel/Seal Strength, Shrink Force, Force at 100% Elongation, Energy Absorption, Cling Peel Strength, Three Point Bend and Block Re-block Strength, Elasticity / Stretch Hood. Suitable fixtures are available for each test. Setup conditions can be adjusted to conform with a variety of standard test methods. Compatible with MT-1500 and MT-2500 series testers. Requires computer with MS WindowsTM to operate.
